X30 clutch

Home › Forums › TaG › X30 clutch

Viewing 5 reply threads
  • Author
    Posts
    • May 16, 2015 at 11:42 am #48327
      Jack Cook
      Participant

      What is the size of the nut that holds the clutch on not the drum.

    • May 17, 2015 at 9:25 am #48354
      Michael Valiante
      Participant

      Hi Jack,

      The nut s 17mm.

      Thx,

      Michael

      http://www.italianmotorsusa.com

    • May 17, 2015 at 7:03 pm #48367
      Jack Cook
      Participant

      Thr 17 mm is the the nut that holds the clutch drum on. I know that I want to know what the big nut that holds the clutch shoes on

    • May 18, 2015 at 2:25 am #48374
      Larry Stevens
      Participant

      It sounds like you have the old style clutch which requires a 30mm socket and the old style puller. The new style clutch requires the new style puller only if the flywheel is going to be removed because the clutch is mounted to the flywheel with 3 allen head bolts.

    • May 18, 2015 at 7:29 am #48400
      Jack Cook
      Participant

      Thanks Larry. I have the puller and the clutch holder just needed to know the socket size 30 mm and it needs to be a thin wall socket right?

    • May 18, 2015 at 8:57 am #48403
      Sean S
      Participant

      “Starter Ring Fixing Nut” 30mm Socket
      Page 26-29

      Looks to be the standard size socket. As long as it fits through the clutch wrench you should be fine.

      http://www.iame.co.uk/wp-content/uploads/2014/01/APPENDIX-5-044-MANUALE-REVISIONE-PARILLA-X30-125cc-RL-TaG-ENG.pdf

      Tony Kart / Leopard

  • Author
    Posts
Viewing 5 reply threads
  • You must be logged in to reply to this topic.