Home Forums Classifieds Classifieds – Want to Buy (WTB) WTB OTK bearing cassettes 40/50mm

Viewing 2 reply threads
  • Author
    Posts
    • #79996
      Mike Burrill
      Participant

      Looking for a set of 2 position cassettes.  I think they were used on OTK Chassis up to 2010.  My kart is a Krypton homologation 52/ch/08.   The Cassettes have a flat on the bottom and the tension screw runs parallel to the chassis tubes. The distance between the upper and lower mounting hole is 57 mm

      Later versions have a V on the bottom  and /or have tension screws at a 45 angle to frame rails and are 60mm between the mounting holes. Those won’t work :(    If you have a set please let me know.  Thanks

      Mike Burrill -
      Karting Kartel

    • #81031
      Cliff Kujala
      Participant

      Hello Mike,

      Did you find the cassettes you need yet?

      Cliff Kujala -
      Visit us on Facebook.

    • #81152
      Mike Burrill
      Participant

      Nope but I did  figure out a work around though.  Do you have some used ones?

      Mike Burrill -
      Karting Kartel

Viewing 2 reply threads
  • You must be logged in to reply to this topic.