Home Forums Chassis & Handling widening kart for xxl seat

Viewing 5 reply threads
  • Author
    Posts
    • #45851
      Michael perez
      Participant

      I have been having a hard time widdening my crg kt1 to fit my xxl seat in what way can i widden it to fit the seat without hurting the chassis?

    • #45859
      Dan Brown
      Participant

      I just installed an xxl seat in my CRG and one in my Margay. I used my hydraulic porta-power to push the left side seat post out far enough. I figured a nice smooth controlled bending was better then a cracked seat post by rushing it or forcing it too fast. You really can’t move the right side post very much and still have adequate engine clearance .

    • #45863
      Matt Dixon
      Participant

      Bottle jack

      94y

    • #45864
      Michael perez
      Participant

      I wish I had the tool to do that but I do not have access to one

    • #45909
      Carl Beavers
      Participant

      Ten pound dead blow hammer works great. Just don’t get to carried away, little bit at a time.

    • #47342
      Greg Wright
      Participant

      An old axle works pretty well.

      Greg Wright
      Rapid Racing Inc.
      Vintage B-Stock Pilot
      "When in doubt Gas it, It won't help but it ends the suspense."

Viewing 5 reply threads
  • You must be logged in to reply to this topic.