Home Forums General Karting Discussion VEN 5 brake pad ?

Viewing 2 reply threads
  • Author
    Posts
    • #56357
      Tom Sabiel
      Participant

      I need to order a set of rear brake pads for a VEN 5 with steel rotor. Do I stay with original pads or aftermarket. Thanks.

       

       

    • #56367
      Mike Clark
      Participant

      I know of 1 guy that used these and liked them. Everyone else just runs stock as far as I know in the DD2 class.

      http://frixa.org/race-products

      there are 2 compounds depending on ambient temperature. They have a disc also.

    • #56401
      Patrick Roth
      Participant

      I would not recommend using the Frixa brake pads on a non-Frixa rotor.  While I prefer the Frixa brake setup over the steel VEN05, my experience was when I purchased both the Frixa rotor and the pads (never tried the Frixa pads on a non-Frixa rotor).  I think I recall someone trying Frixa pads on a non-Frixa rotor and it wasn’t good at all…

      My last 4 karts were CRG’s with VEN05 brakes and I highly recommend you stick with OEM.  I have tried numerous times to save a few bucks and go with aftermarket and on several times they have disappointed me.  While some claim “OEM compound” I can’t say that they ever felt the exact same as OEM…

      If you do go with aftermarket, I have had the best luck with the ones that Acceleration Karting sells.

Viewing 2 reply threads
  • You must be logged in to reply to this topic.