TonyKart steering shaft collars

Home › Forums › Chassis & Handling › TonyKart steering shaft collars

This topic contains 2 replies, has 3 voices, and was last updated by  tony zambos 10 months, 2 weeks ago.

  • Author
    Posts
  • September 11, 2017 at 4:41 pm #85774

    William Weiler
    Participant

    I noticed my used kart doesn’t have the steering shaft collars around the upper plastic bushing. It seems like pulling on the wheel would cause the uniball to come out of it’s spot without the collars, but it hasn’t happened. Do people normally just leave these off?

    TonyKart 401s LO206
    Masters Class
    Morgan Hill, CA

  • September 13, 2017 at 12:13 pm #85879

    William Martin
    Participant

    There is a snap ring holding the bearing in place. Unless you be Godzilla, you probably can’t pull hard enough to pop it out!

     

  • September 29, 2017 at 7:39 am #86506

    tony zambos
    Participant

    There is a steering shaft locking collar that’s available.
    https://cometkartsales.com/I.-0115.00-Steering-Column-Locking-Collar.html

    LAD Specialties customer / tony kart / rotax / kt100

  • Author
    Posts

You must be logged in to reply to this topic.