Sidepod conversion help

Home › Forums › General Karting Discussion › Sidepod conversion help

This topic contains 6 replies, has 4 voices, and was last updated by  Mark Lockett 4 years, 10 months ago.

  • Author
    Posts
  • December 1, 2014 at 6:38 pm #38094

    Mark Lockett
    Participant

    Ive seen in the past a kit of sorts for converting an older chassis with the old breadbox sidepods and nerf bars to the newer nerf bars. It was a weld on tube that was sized and drilled for unico and newer nerf bars.
    I can’t find that now. Does anyone know who his this? I’ve seen it but can’t remember where
    Thanks in advance.

  • December 1, 2014 at 6:49 pm #38096

    CLIFF BRYANT
    Participant

    This might be what your looking for. Check out Comet kart sales. Under chassis parts/Weld on parts. Nerf bar weld on spud.

    GROWING OLD IS MANDITORY GROWING UP IS OPTIONAL

  • December 1, 2014 at 6:54 pm #38098

    Mark Lockett
    Participant

    Thats not the one I remember but that will work. Thanks :-)

  • December 1, 2014 at 7:27 pm #38099

    jack lachut
    Participant

    mark, check out the one on margay’s website under misc bodywork components.

    sku#59304  which is also a weld on kit.

  • December 1, 2014 at 7:43 pm #38100

    Mark Lockett
    Participant

    Boom! That’s the one I remember
    Thanks everyone.

  • December 2, 2014 at 6:36 am #38138

    Walt Gifford
    Participant

    If you’re going from bread box to unico I think all you have to do is cut the bottom “L” off the bracket and drill a couple of new holes.

    Gif

    FAA certified jet engine and aircraft technician,
    Nicholson Speedway class champion 2001,
    Yamaha KT100 Service Center,
    41 years karting experience

  • December 2, 2014 at 6:42 am #38139

    Mark Lockett
    Participant

    Mostly I wanted to get rid of those old huge angled type nerfbars
    I may just part the whole chassis out. Not sure yet.
    Thanks

  • Author
    Posts

You must be logged in to reply to this topic.