Rotax Jetting

Home › Forums › TaG › Rotax Max › Rotax Jetting

Viewing 10 reply threads
  • Author
    Posts
    • July 10, 2014 at 6:51 am #30039
      Steve Jordan
      Participant

      I’m changing to a new computer and need to transfer my Jet Tech software. What do I need to do to complete this process?

    • July 10, 2014 at 7:58 am #30041
      Patrick Roth
      Participant

      Delete

    • July 10, 2014 at 8:50 am #30046
      tony zambos
      Participant

      Go to the Jet Tech web site and there are instructions on how to transfer the software to another pc. Should not require any luck at all.

      LAD Specialties customer / tony kart / rotax / kt100

    • July 10, 2014 at 8:57 am #30047
      Patrick Roth
      Participant

      Delete

       

    • July 10, 2014 at 9:18 am #30052
      tony zambos
      Participant

      Steve,
      now that I have a real computer to work with, this is the link to the FAQ page of Jet Tech.
      http://www.rotaxjetting.com/FAQ.htm#Transfer

      or even better. http://www.rotaxjetting.com/LicenseTransfer.htm

      LAD Specialties customer / tony kart / rotax / kt100

    • July 10, 2014 at 9:28 am #30055
      Steve Jordan
      Participant

      Thanks Tony for the help. I went to the web site and did as instructed with the emails but I have yet to receive a reply back from Jet Tech. So I was hoping to have John reply so I could have him check his email. I sent the emails back on 29th of June.

       

    • July 10, 2014 at 10:17 am #30058
      tony zambos
      Participant

      Steve,
      Hopefully this thread will catch John’s eye. Know his email was hatched into earlier in the year and he couldn’t/wouldn’t respone. But I believe that has been resolved.

      LAD Specialties customer / tony kart / rotax / kt100

    • July 10, 2014 at 11:25 am #30061
      John Savage
      Participant

      Steve, I have emailed Colin about this thread so he has a heads up

      Patrick, who on earth told you that?

       

      Tony, many thanks

       

      Jetting and Kart Set-up Software

      http://www.rotaxjetting.com

    • July 10, 2014 at 11:38 am #30063
      Patrick Roth
      Participant

      John,

      I was mistaken as I misunderstood a previous communication I had with Colin.  I have deleted my previous posts just to prevent any confusion as my statement was inaccurate.

      Thanks!

       

    • July 10, 2014 at 12:01 pm #30064
      tony zambos
      Participant

      Nice job on both John’s and Patrick’s parts.

      LAD Specialties customer / tony kart / rotax / kt100

    • July 10, 2014 at 12:54 pm #30068
      Steve Jordan
      Participant

      Thanks for help John

  • Author
    Posts
Viewing 10 reply threads
  • You must be logged in to reply to this topic.