If I understand your question, the chassis bodywork mounting points are standardized according to spec, which the ’08 RR conforms with. Each bodywork style has a particular brackets/bars, but they all conform to this std where the bars interface/insert with mount tubes on the chassis.
The thing that might take some mount “customizing” would be the front “nassau” steering axle panel. For example, when I changed mine from NE 2 to Evo, I had to add a ~2″ spacer nut to the bolt to raise the Evo design (It’s a bit more low slung compared to the NA 2 style) so it could clear the steering wheel. You’ll have to install it to check for clearance issues.