Mychron Help

Home › Forums › General Karting Discussion › Mychron Help

Viewing 3 reply threads
  • Author
    Posts
    • October 27, 2019 at 12:05 pm #104590
      Todd Kageals
      Participant

      Guys,

      I picked up a shifter and the fellow I bought it from threw in a BUNCH of other stuff.  The shifter has a Mychron 4 2T on it with and EGT, Water Temp, and timing sensor hooked up.  That leaves the port for the expansion box open.  I also got a Mychron 3 extreme with an expansion box, along with various sensors, and all sorts of other stuff.  I want to use the speed sensor with the Mychron 4 2T.  Is the only way to do that is to add an expansion box?  If so, will the expansion box from the Mychron 3 extreme work?

      Thanks,

      Todd

    • October 30, 2019 at 5:38 am #104642
      Clark Gaynor Sr.
      Participant

      Get a hold of AIM Technologies, I believe they have an office in Roanoke.  I’m sure they’ll know what will work with what.

      Clark.

    • October 30, 2019 at 6:46 pm #104668
      Todd Kageals
      Participant

      Clark,

      What you up to?  My son and I have been running some practice laps at Mooresville in our LO206 karts.  We have not made it to the Woodbridge races yet.  Waiting for you guys to come back to VIR!  I also picked up a CR125 that I am going to run, just for fun.  I also now have a 125 TAG kart that a fellow gave me.  Reworking that one this winter.  We’d love to come race with you guys again.

      Todd

    • November 2, 2019 at 6:58 am #104703
      Clark Gaynor Sr.
      Participant

      Hi Todd, unfortunately we won’t be going back to VIR anytime soon.  We were told in no uncertain terms, other events were a better “fit” then we were…so we’re out.

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.