This topic contains 1 reply, has 2 voices, and was last updated by  Adrian Pagliaroli 11 months ago.

  • Author
    Posts
  • #89532

    Walt Gifford
    Participant

    I’ve got an old Margay that’s almost new. I want to run it in 206 or animal but I would need to get a jackshaft to get around the 3rd rail which is angled back to far for chain clearance.

    I have locally a great welder/steel fabricator so it would be easy to move the rail forward on the right side. I’m thinking there are others who have done this and I just want to know if this would make a noticeable difference in the handling of the chassis and how did it change.

    Thanks,
    Gif

    FAA certified jet engine and aircraft technician,
    Nicholson Speedway class champion 2001,
    Yamaha KT100 Service Center,
    41 years karting experience

  • #89567

    Adrian Pagliaroli
    Participant

    I don’t think it will make too much of a difference.  I did it to my sons arrow ax8 cadet kart and we have had no problems.

You must be logged in to reply to this topic.