Kart lift skid plates

Home › Forums › General Karting Discussion › Kart lift skid plates

This topic contains 4 replies, has 4 voices, and was last updated by  Jon Romenesko 5 years ago.

  • Author
    Posts
  • October 6, 2014 at 3:58 pm #34936

    Cole Liggett
    Participant

    Anyone running the kart lift small plastic skid plates care to chime in on their effectiveness?  I’ve been thinking about running them on my arrow X1, I figure anything I can do to help prolong the life of my chassis is probably worth doing.

    thanks

  • October 7, 2014 at 12:43 pm #34970

    Mark Dismore Jr.
    Participant

    They work great and definitely help maintain the resale value of the kart. I recommend them. The short style work well and they long style work well. I think it’s personal preference and also how concerned you are about scraping up the bottom.

  • October 7, 2014 at 1:16 pm #34971

    Finch Guenther
    Participant

    I’ve used the short ones for 2 seasons now and have zero complaints.

    Finch Guenther

    #51 CRG KPV

  • October 7, 2014 at 7:12 pm #34999

    Cole Liggett
    Participant

    Thanks guys, looks like I’ll be placing an order.

  • October 8, 2014 at 11:14 am #35033

    Jon Romenesko
    Participant

    Not those specifically, but I put some Stainless Steel ones on my shifter chassis.  Regardless of which ones you buy, its worth every penny.

     

    Always Use (chassis) Protection

    GP10/CR125
    S2 Semi-Pro Stock Moto - SKUSA Rocky Mountain ProKart Challenge

    http://theslipangle.com/

  • Author
    Posts

You must be logged in to reply to this topic.