Home Forums Classifieds Classifieds – Kart Packages GP Racing Honda Shifter Kart

Viewing 1 reply thread
  • Author
    Posts
    • #100461
      Fred Robertson
      Participant

      GP Racing Honda Shifter Kart.

      2008 32mm chassis with 50mm rear axle and 25mm spindles/10mm kingpins.  VEN05 brakes with steel rotor.  Sniper infinitely adjustable frontcamber/caster plates. Steering is near new, almost all front end bearings (hub/kingpin/rod ends) are 1 race old.  Chassis has almost no wear on the bottom at all.  CIK bodywork in decent shape, some marks from close racing. Medium Large fiberglass seat.

      Honda CR80 engine with about 5 hours on fresh Hi-Rev Engineering full rebuild.  6 speed transmission with billet 3rd gear.  Mikuni TM28 carb with recirculating pump around system to eliminate starvation in corners.  Carbon fiber reeds and coil mount.  Stubby NGK plug and cap.  Oversize Champion aluminum radiator.  RCE pipe with M4 silencer.  Very nice articulating PSR engine mount.

      Also have some spares (clutch, brake pads, carb jets, etc) that are not included, but could be negotiated for based on final price.  Recently bought a newer kart, so this one has to go.  Located in central Ohio.  Willing to palletize for shipping if you arrange for liftgate pickup and pre pay shipping costs, or will work with a Uship arrangement if you arrange and pay for shipping.

      Asking $2500 OBO

    • #102393
      John Eden
      Participant

      Hi Fred, this is John, I am interested in your GP Kart, can you call me at (317) 538-3694

      Thanks

Viewing 1 reply thread
  • You must be logged in to reply to this topic.