This is everything you need to go first class Enduro Racing.
Built in 2012 by Indy Enduro Kart, this is a first class kart with 2-2nd place finishes at Mid-Ohio in Sportsman Hvy. & Med 2013. A 5th place finish Daytona in Sportsman Med. (23 karts started) 2012, and a 1st place at MIS in 100cc Yamaha Hvy 2012! All were our first visits to these tracks!
You can see pics at the link below. A few things that are not in the pictures include a powder coated crank up stand, a tire bead seating metal tube tool, the rear panel that goes between the rear of the side panels. All that is in the trailer… Which is also for sale…. More on that in another post later.
This includes everything you see in the pics which is too much to list, but here are some highlights:
3- Complete Kris Buerman built Yamahas. The one on the kart as about 2 race weekends on it. The other two literally have just been broke in, and have one practice session each on them (we were experimenting at VIR). SMC Clutch which has 2 race weekends on it and is also a Kris Buerman Special. Spare Sportsman pipe, Yamaha L4 Pipe, Yamaha Pipe Carb, plus another spare carb, Starter, Gear hub puller, New bottle of clutch oil, new case of castor oil, a bunch of wheels and tires, bead breaker, wheel balancer, Exact-Toe Gauge, Every front gear drive you’ll ever need, and every rear sprocket gear you’ll ever, and not ever need 66-86!! Transponder w/charger.
Also comes with all-in-one double stack kart stand!! Top stand comes off and becomes a usable pit table. Has tire double tire rack, carries 2 tool boxes which are included (sorry, not tools) :), a place to carry a nitrogen tank (tank and gauge are also not included), Spray bottle rack, removable pull handle so that 1. it’s out of the way, and 2. to get secure or remove the main tool box. Reversable vice/tire mounting tool (the tire tool is awesome for less work and time saving).
This package has everything and more you’ll need to go racing!!… And be super competitive!
If you are the type that worries that this is a “one-off” kart, and not made by the 1 or 2 remaining builders, DO NOT BE SCARED! This is a high quality piece (jigged and welded by a Midget/600/Sprint Car/Silver Crown builder), that is already set-up for most tracks, and is very competitive. When you see the kart, you will see the high quality welding. Also, there is nothing parts wise on this kart, that cannot be easily replaced by the same products that are already on the market, should you need too.
You will be a race ready, out of the box competitive, want for nothing package for an awesome price!