RLV R5 H CR125 Shifter Pipe. 45mm ID inlet, 1”OD outlet plus sleeve for 1-1/8” outlet. Excellent overall condition with very little use, no crack or repairs. One small dimple (5/8” diameter x less than 1/16” deep) on the front and one very small dimple at the cradle mount area. Otherwise perfect. $195 shipped.
PCR 125cc pipe, similar shape to IAME Parilla Leopard pipe, very good condition with no dings, 321 / M / 09 stamp on it. $55 shipped.
Leatt Brace- Sold
Breadbox style side pods, black, KG. No graphics. Inner left pod has relief cut for radiator clearance. Otherwise, great condition with only a few races on them. Each measure 26.5” lg x 7” wd x 7.5” t. $55 for the pair shipped anywhere in the US. Also have a new white old style KG driver panel fairing I’ll throw in the box for an extra $10.
Freeline 28 x 92 motor mount. Fits Leopard, HPV, K-71, Comer P50, Comer K80, TSL98, PV92, Rotax. Recently removed from IAME Leopard, but should fit many others. Clean and in great condition other than scuffs on bottom of lower clamps. $35 plus actual shipping cost.
Freeline 30 x 92 motor mount. Fits Leopard, HPV, K-71, Comer P50, Comer K80, TSL98, PV92, Rotax. Recently removed from IAME Leopard on an Arrow AX chassis, but should fit many others. Clean and in great condition other than scuffs on bottom of lower clamps. $35 plus actual shipping cost.
Set of 4 magnesium wheels: Metric Euro pattern with beadlocks, (2) 5 x 5” (outside width) fronts, (2) 5 x 8-1/4” (outside width) rears, 2-1/4” inside offset on all 4 wheels, gold/mustard color, labels say CIK/FIA Standardisation Swiss Hutless, one rear has “Monostar” cast on the outside edge. One front looks a bit more like aluminum on the inside, but feels to be the same weight as the magnesium one. All straight, true & clean. $120 free shipping.
8mm Righetti Cylindrical Inner Hex Wheel Nuts: (qty 18) 30mm long x 15mm dia plus (qty 6) at 22mm long. All 8mm hex key drive, clean and good condition, minimal surface rust on faces. $1 each or $20 for all 24 of them, plus actual shipping cost.
Mychron Cables:
(qty 1) yellow box end K-type connector spark plug CHT cyl head temp $10,
Old Digatron DT-13A Tach/Temp: Fully functional, two different tach leads and cylinder head lead, all in good shape, includes steering wheel mounting bracket. $25 plus shipping
Small aluminum fuel tank, measures 4-3/4”W x 5-3/4”L x 7”T not including cap height (7-1/2” L with mounting tabs) complete with side mount shut-off valve. Exc condition, clean inside and out. $35 plus shipping.
Steering wheel: Gold Kart, blue suede leather, 12-1/4” OD x 1-1/4” thk grip. Good shape, no tears, some wear. $40 shipped.
KT100 4-hole WKA /IKF can exhaust. Exc condition. $50 free shipping
Electric starter shaft, Bendix for left-hand motor. 8mm hex drive, .47” ID shaft, about 9” overall length. $10 plus shipping
Prospeed Components black anodized aluminum catch tank bracket with tank. Bracket exc cond, tank is cruddy. $5 plus shipping
Horstman DXL clutch drum, new, never used, 10 tooth, with bushing. $30 plus shipping
TaG/shifter radiator cap, 1.0 bar, $5 plus shipping
Pictures available for everything, just ask (send PM with your e-mail address). Paypal preferred. Buyer to pay actual shipping costs from zip 01983 via U.S. Post Office unless free shipping is specified. Get this stuff out of my shop!!!
