Home Forums Classifieds Classifieds – Chassis 2016 FA Victory and MANY Spares!

Viewing 0 reply threads
  • Author
    • #86875
      Peter Zambos

      Changing brands for next season, so we have a lot of OTK to unload:

      2016 FA Victory, 30MM
      Used for one season of Yamaha Jr. at New Castle and one season of Yamaha Senior at Route 66 Sprint Series. It comes as a full roller with new MXP wheels, 1030mm N axle, modified tank for bottom feed, angled Mychron 5 mount, KartLift chassis guards, bumper savers ( 1 1/2 weekends old), and a size 2 seat.

      Here is a list of all other OTK components for sale:
      TWO FULL SETS OF MXC WHEELS. Definitely some wear, but all are round and hold air.
      Standard tank, used
      Spare nassau panel, used
      Spare floor pan, used
      Additional set of HST eccentric caster/camber pills
      Set of J3 4 dot eccentric caster/camber pills
      Spare size 2 seat, used
      Size 2 seat, NEW
      Tony Kart branded steering wheel w/10 deg. mount for Mychron 5, used
      Steering shafts, two, NEW. Both w/extended pitman arm, 470mm
      Brake pad set, NEW
      Tie rods, new, 6 total of 270mm length
      Torsion bar, gold, NEW
      Torsion bar, chrome, NEW
      Spare torsion bar clamps
      Rear hubs (2), magnesium 50x92mm, used
      Front hubs (3), magnesium 22x80mm, used
      Gear carrier, 50mm, NEW – modified to use flat head bolts for better clearance
      Spindle/Stub Axle, left, used
      Full set of NEW bumper hardware (rubbers x2, bolts x2, bushings x2)
      Array of axles:
      H – full 1030mm
      HH – cut 1010 mm
      N – cut 1010 mm
      HD – full 1030 mm
      Q – full 1030 mm, used just once

      The kart and all spares are located in the western suburbs of Chicago, for local pick up only. All reasonable offers will be considered; any offer for all items to one seller preferred. PM me with any questions.

      Also for sale:
      ALL THINGS YAMAHA : two motors w/carbs and cans, four clutches, one mount.
      Mychron 4 w/ GPS-05 module, $250

Viewing 0 reply threads
  • You must be logged in to reply to this topic.