Thomas Barth wrote:
Andrew, Had a customer with the same problem. I believe he solved it by checking the float arm and pivot pin. I’ll check with him and let you know.
floats seem to move freely…pivot pin seems ok and in place…doesnt feel like its sticking at any point…i dont see any holes in the floats so i dont think they would be taking in fuel and not floating properly…the fuel will just continue to syphon out through the airbox side of the carb til it drains the fuel tank if i let it go long enough, i have to pinch off the fuel line to get it to stop. ive tried all 4 needle settings with the c clip. not sure what else to check at this point