Home Forums 250 Superkarts Anderson Steering Hub 19mm? Looking for Driver's Bubble Bracket Reply To: Anderson Steering Hub 19mm? Looking for Driver's Bubble Bracket

#7196

Chris Reinhardt
Participant

Mark, a measuring device is your friend……  Last Anderson steering shaft I looked at was 3/4″, about 1 mm smaller than 20 mm.  If you have a clutch on the steering hub, Anderson used to bush the 20 mm hub and bore it to 3/4″.  I have a fixture to doing mine in the lathe.

CR

Chris Reinhardt

CR2 Motorsports

http://www.cr2motorsports.webs.com/

XV Racing Products

http://www.xvengineering.com/

­­