Home Forums Shifter Karts K9B/C cylinder retrofit on K9 Reply To: K9B/C cylinder retrofit on K9

#65512
Glenn L Riggs
Participant

I have used the b and c and kz10b on a 9 believe the cases are very close they do have different inserts for the head and make one that you can cut to meet your squish area have to watch the cc`s tho as I have had a couple that could get the squish right and have the cc would not pass so went with the rule for cc and they ran fine. Hope this helps. Have also found that when some engine builders go thru an engine they square the case and that lowers the whole thing so that may be an option also.