Home Forums Chassis & Handling Weight distribution Reply To: Weight distribution

Gary Lawson

If you have room to move the seat forward an inch or so that’s what you should do. Many times you can move the pedals forward the same amount and remain comfortable. If the seat is as far forward as possible then take your 5# weight and move it to the front. Your side to side is very close as far as seat position. Assuming your camber, toe, stagger, and air pressure are all set then the Rf needs bent down slightly. Probably about an 1/8″ at most. You can get the fronts even and the rear within 5 if you get it perfect.
As mentioned do not move your ride height to change front weight. It won’t do much anyway.