Home Forums Autocross / Solo 2 Advice for new go kart dad for SCCA autocross? Reply To: Advice for new go kart dad for SCCA autocross?

#52048

Alan Sheidler
Participant

Mathieu,

Look for internet images of the linkage between the brake pedal and the hydraulic master cylinder on karts.  Basically, the standard is a rod with clip-pin joints or clevis types on the ends.  The backup is a cable which would act to provide the linkage if the rod fails.  It is commonly located parallel to the rod, either above or below it, and attached to the pedal and MC lever independently from the rod.

Parts like this:  https://cometkartsales.com/Metric-Brake-Rod-and-Clevis/