Home Forums 2-Cycle Racing Older Sonik engine question Reply To: Older Sonik engine question

Otto Hoel

Hi Taylor, and thanks for the info.  I’m not aware of which of the crank pins I have, but I’ll probably have TSRacing take a look at the whole kart eventually.

I finally got the parts and the carb rebuilt.  Took me a while to figure out how to set the needle arm so that it could not leak fuel all over my floor.  However, it still will not start.  I got a spark, but no fuel.  I got a slight fuel drip out of the front of the carb after cranking, but nothing gets into the cylinder, the spark plug is dry.  So more research ahead.

Thanks again for your info, it all adds to my knowledge.