Home › Forums › Tech Talk › Carb jetting questions › Reply To: Carb jetting questions
Update: ordered a JD kit. ended up installing a 55 pilot, 175 main, blue needle with the clip in the 3rd notch. Air screw 1-1/2 out.
(Kit didn’t have a 168 main, but came with a 162,170, 175 & 180)
17O was a little lean up top my buddy said according to the plug and 180 was a little rich.
She idles now and the idle screw actually works!
Low end cleared up nicely. No more bogging/hesitation. It’s now acting like a typical light switch 2-stroke. Lol!
Plugs is a light tan color after a WOT pull.
Thanks again for all the help guys!