Home Forums 2-Cycle Racing Disoonnecting connecting rod from the piston (or vice versa) Reply To: Disoonnecting connecting rod from the piston (or vice versa)

#40002

tony zambos
Participant

Len,
What are you trying to accomplish? If you just wanted to removed the piston from the rod, splitting the case wasn’t neccassary. Pull the clips that hold the wrist pin in and push out the pin. If you’re replacing the rod, the crank has to come apart. For help on line, GIF is going to be your best resource. If you need a shop to help you out, LAD Specialties is not that far of a drive.

LAD Specialties customer / tony kart / rotax / kt100