Home Forums Chassis & Handling Axles? Reply To: Axles?

#39243

Jay Sinon
Participant

We have a hopping problem going into turns on a high grip track. We are running a  Yamaha on a OTK Kosmic Mercury I have the wheels set to 54 3/4″ and we are using the gold stabilizer bar in the front and none in the rear. I tried raising the axle in the frame that seemed to help but was destroying the bottom of the frame over the rumble strips( I know stay of the strips)  So I put the axle back to the middle setting. What would you try next? I’m not sure from these posts if I should try a harder or softer axle to fix this.

Thanks

TaG Sr.