Stu Hayner
Joined: 23 Dec 2006 Posts: 229 Location: United States, California, Yorba Linda
|
Posted: Tue Feb 26, 2013 9:46 am Post subject: Maddox (CRG) frame only - new |
|
|
I have two Maddox (CRG) with 2014 Homolagation
30/32mm (31) frames only - brand new.
Do you have a Road Rebel, and would like to get a little more flex? Or if you have a bent frame, want to try a fresh new frame, or want a spare just in case, this may be what you are looking for.
This frame should work with most late model karts produced by CRG. This one in the picture has been used for fitments, but never completed. The second frame is still in the original plastic.
This frame retails for just under $2k.
$1200.00 your cost.
Info from the MADDOX site;
MADDOX KF - without front brake
MADDOX KART HOMOLOGATED IN KF3 AND KF2 CLASS
Colour in RED
Tubes 30 and 32mm
Wheel-base 1050mm.
If the kart was complete, it would have look like the picture below.
MADDOX KART
HOMOLOGATED IN KF3 AND KF2 CLASS
> Colour in RED
> Tubes 30 and 32mm.
> Wheel-base 1050mm.
> Rear axle 50mm.
> Front wheel hubs 80mm.
> Set spoilers NA2 complete in pearl colour
> Rear bumper spoiler NA2 in black colour
> "Steering wheel alcatara ""MADDOX""
> Seat size 1-2-3-4
> Front bar with clambs 30mm.
> Rear bar with clambs 30mm.
> 1 extra seat stays on engine side.
> 2 extra seat stays on brake side.
> High quality magnesium engine mount.
> Fast mounting 8,5 liter petrol tank.
> Recovery tank.
> Rear wheel hubs 50x95mm.
> Hydraulic self-adjusting brake system with
flooting ventilated rear disc
> Caster adjusting ability's.
> Set magnesium wheels
> Stub axles 25mm
> Sticker set
> Chain guard full covered
Any questions, please text me at 714.305-612three _________________ Remember......it's not always the best arrow...but more importantly the best Indian. |
|