LSGP - Stock Honda Gearing

Tyson Henry · Posted: Mon Feb 25, 2013 1:01 pm Post subject: LSGP - Stock Honda Gearing

For the people going, anybody decided on a starting gear ratio based on the straight length of 900'? I'd like to get the drive gear right so I don't have to change it out there. Trying to do as little work as possible out there and just have a good time!

Kirk Deason · Posted: Mon Feb 25, 2013 1:51 pm Post subject: Re: LSGP - Stock Honda Gearing

Quinton Dawn · Posted: Mon Feb 25, 2013 5:00 pm Post subject:

Tyson, the track is also about 400ft shy of 7/10mile though. I was going to start a a 17/27 : 1.588

qd
_________________
OBSESSED......it's what the LAZY USE TO DESCRIBE THE DEDICATED

Tyson Henry · Posted: Mon Feb 25, 2013 9:04 pm Post subject:

Hmm. I was thinking about 18/26, 1.44. Figured use 1-5 for most of the track except the front straight. Not sure what the exit speed is going to be on the rest of the slower turns though.

Brad Johnson · Posted: Tue Feb 26, 2013 11:21 am Post subject:

I have 17/25 bolted on mine to start with. I'm the worst at picking somewhere to start. The fast guys at my track run a 17/27, 7/10s long shorter straight. Entrance to the straight should be faster than our track so that was my thinking on the 17/25. Good Luck. BTW, running Stock Heavy here.

Tyson Henry · Posted: Tue Feb 26, 2013 12:36 pm Post subject:

Running stock heavy also. See you there.

Thanks everyone for their input.