Tony Spalding
Joined: 14 Aug 2010
Posts: 17
Location: United States, Indiana,
|
 Posted: Sun Nov 04, 2012 3:28 pm Post subject: LO 206 at Daytona |
 |
|
Thinking about putting a kart together to run another class at Daytona.
What clutch, gearing and belt or chain drive for LO 206 class
I have no 4 cycle exp.
Thank You
Tony |
|
Dominic Greco
Joined: 17 Dec 2009
Posts: 224
|
| Posted: Mon Nov 05, 2012 7:45 am Post subject: |
|
|
Tony,
A 36" wide, right hand drive, sit-up enduro kart is what you will need. 5 inch wide by 6 inch diameter wheels at each corner, and 5 inch wide tires on them. The cluch type is not a huge deal, but the ratio is. Belt or chain, you will need a final ratio at or less than 2.5:1. TS racing, CKI and Laukaitis Racing all have good supplies of road race parts for the 4-cycle crowd. Jim at Max touque has parts for belt and chain also.
Good luck, and see you at Daytona.
_________________
www.southernkartclub.com |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Login to check your private messages
Login
