Forum Replies Created
January 25, 2015 at 11:34 am #41031
Post updated. Both KT100’s are sold.January 24, 2015 at 3:27 pm #41002
Post updated. Still have 1 KT100 and 1 HPV engine left, as listed.January 22, 2015 at 7:52 pm #40924
Bakersfield and Dixon run what is called the Senior Super Sportsman class. This class utilizes an RLV3 pipe. This is a different pipe than the L2 pipe (or any other A/L/G series pipe). It is a smaller pipe than the L2, making it potentially easier on clutches and engines. Both or either club may allow the use of an HPV3 pipe, which can be found used for less money than a new RLV3 pipe. The HPV3 and RLV3 pipe are very similar.January 21, 2015 at 4:50 pm #40852
Yes, both KT100’s have 787 cylinders.December 27, 2014 at 9:53 pm #39452
I would also recommend MDG Karting and Stu Hayner. Stu has the knowledge, experience and products to get you what you need. Call him at the shop (714) 928-5278.November 6, 2014 at 8:31 am #36628
Pre-entry is now closed, but registration will be available at the track. See you at Grange on Saturday!October 29, 2014 at 2:57 pm #36190
Pre-entry closes in 1 week. See you there!October 1, 2014 at 11:26 am #34738
“Also, I’ve seen ikarts with TAG motors, but has anyone used it in Yamaha?”
I’ve seen them used with a KPV/HPV (similar to Yamaha and run in the same class with Yamaha on the west coast). The Ikart seemed to work very well with the 100cc KPV power plant.September 29, 2014 at 10:26 am #34641
F100 is racing this Saturday! Be there!July 20, 2014 at 12:24 pm #30627
Pre-reg closes this Wednesday at midnight. Skip the registration line and click the link below:
Racers may also register on race day for the same price.
See you at the track,
F100July 14, 2014 at 9:49 am #30240
Good to hear from you! The schedule is now posted at the following link:
SebastianJune 12, 2014 at 9:54 am #28840
This Saturday! Expecting a great turnout! Be there!May 14, 2014 at 11:09 am #27470
F100 is racing this saturday! See you there!November 29, 2013 at 11:51 am #16754
F100 is racing tomorrow, Saturday, November 30th at Grange! See you there!November 8, 2013 at 12:11 am #15039
Can you post a link to the google map/photo ?
I think this might be it:November 8, 2013 at 12:09 am #15038
I do. I have a high top camper shell with a kart rack that sits on top of the bed rails, made out of wood, that serves as a platform for a second kart. I made some ramps that allow me to roll the second kart up onto the platform. I have an 8′ bed though. If you have a shorter box and no camper shell it may be a little more difficult to build a similar setup to mine, as the shell provides the bracing for my platform and the extra bed space provides the room I need for the ramps and to store taller items.October 21, 2013 at 11:06 pm #13353
Reply sent via pm.
I am still looking for more pipes, particularly used pipes. Midwest guys, somebody must have some pipes sitting around in the garage? Us west coast racers would sure like to put them to use. Send me a pm if anyone has anything.
ThanksOctober 20, 2013 at 9:21 pm #13243
Thank you for the kind words! Glad you had fun at Round #6 and I hope that you are healed in time for Round #7.
F100 had some excellent racing on track at Round #6, and we look forward to more of the same at Round #7, the final round of 2013 to be held on November 30th at Grange.
F100 has classes for drivers of all ages, and we are looking to grow our Junior and Cadet divisions heading into 2014, to go along with our already well populated Senior classes.
If you would like to learn more about F100 please head to F100karters.com.
See you at the track,
F100October 10, 2013 at 1:32 pm #12508
This Saturday! See you at the track!September 6, 2013 at 5:48 pm #9176
Just over a week until race day! F100 expects a very good turnout and some great racing. Go to F100karters.com for all the info. See you there!September 6, 2013 at 5:45 pm #9175
Latest Forum Topics
Comer 80 Clutch Drum – New $75
by Steve Frank
14 minutes ago
LH Starter, 428 chain breaker, wheel balancer, enduro seat & tank
by Joe Brittin
16 minutes ago
SMC Axle Clutch — weight installation ??s
by Ted Hamilton
1 hour, 2 minutes ago
MISC SHIFTER PARTS AND TOOLS
by Dan Dragoi
1 hour, 53 minutes ago
Gp11 /fp7 bodywork
by dacey spinuzzi
2 hours, 6 minutes ago
2009 Tornado Kid Kart – Roller or Package
by Scott Jagusch
3 hours, 24 minutes ago