Forum Replies Created
November 4, 2013 at 8:24 pm #14717September 5, 2013 at 9:23 pm #9123
I realize that most if not all of what I want can be purchased at any kart shop. The reason I’m putting an ad on EKN is so I can save some money buying used.August 21, 2013 at 8:19 pm #7746
Do you have photos of each item? firstname.lastname@example.org
ChadAugust 21, 2013 at 8:00 pm #7745
Hi Brian, do you still have the transponder? If so do you have pictures that you could send to email@example.com please? Thank you.
ChadJuly 21, 2013 at 8:30 am #4311
Check the copper ground wire that is attached to the coil. I was having the same problem with my engine bogging at the start and it took forever to get up to speed. I rebuilt the carb twice, I changed the carb, I changed the air filter, I messed with the needle settings, I was about to start adjusting the clutch when I finally noticed that ground wire was very loose. So I removed the coil, tightened it down, and the next time out the engine ran awesome. Give it a shot and good luck.
Latest Forum Topics
Crg/sniper king pin bolts and walbro wb3a
by Finch Guenther
1 hour, 56 minutes ago
Birel Rotax Max $2600!!!
2 hours, 5 minutes ago
2012 Tony Kart Krypton 32mm- Honda GX390 4 Stroke Speedy Kart Rotax ready
by Wesley Bourne
2 hours, 49 minutes ago
Best In helmet communication ?
by WIlliam Hubbell
54 minutes ago
Robopong 2014 photos and video
by Bob Spedding
6 hours, 29 minutes ago
Tag Jr-2013 Tony EVK and Leopard (MY09)- 3rd at 2013 Supernats !
by Kurt Nufer
10 hours, 15 minutes ago