Home Forums General Karting Discussion TM K9c cylinder – replate or new

This topic contains 3 replies, has 3 voices, and was last updated by  Rod Balding 7 months, 4 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #64175

    Rod Balding
    Participant

    Hi ,

    I have bone stock TM K9c that has worn through the plating under the exhaust port , it has been plated once already according to the previous owner ,  I want to stay stock so I have 3 options :

    1 – Buy a new “C” cylinder .

    2 – Hope someone has a low hr. used stock “C” cylinder (no port work)

    that I could buy at a decent price .

    3 – Re-Plate my cylinder and if I do that , who do you recommend , he said

    Power Seal USA done it the last time and they seem to have done a good

    job blending into the ports , unknown hours but has the 2nd size up

    from stock bore (53.94) .

     

     

    Thanks

    #64179

    andy graham
    Participant

    Millenium is the known throughout the motorsports industry as the best of the best when it comes to replating.  I’ve also have excellent results from Langcourt in Alabama.  Whoever you use, just make sure you send a brand new piston with the cylinder you want replated.  Don’t use any shop that tells you that’s not necessary.  Good luck.

    #64196

    Glenn L Riggs
    Participant

    I have a 9b cylinder is on second replate and not run since is pretty much stock the b and c are pretty much the same. Have also 9c 1 replate pretty much untouched inside  250 for B and 350 for c shipped  in usa. Both very good condition. e mail at kart777@aol.com Thanks Glenn

    #64199

    Rod Balding
    Participant

    Thanks Andy , and Glen I sent you a PM

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Karting's News and Information Leader ekartingnews | an HMG publication