Home Forums Shifter Karts Source for '99 CR125 CDI/Stator 8 pin Connector?

This topic contains 9 replies, has 4 voices, and was last updated by  Stephen Lamana 4 months, 3 weeks ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #14354

    Chris Bany
    Participant

    My CDI to Stator connector (female side) cracked in shipping and I can’t find a replacement online.  Anyone have a source for this 8 pin connector (female) on Stator wiring side?

    I would greatly appreciate.

    #14357

    Chris Reinhardt
    Participant

    How many you want?

    CR

    #14358

    Chris Bany
    Participant

    Chris, just looking for one.  Do you know of a place to purchase?

    #14359

    Chris Reinhardt
    Participant

    Yup, Me!

    #14375

    Chris Bany
    Participant

    @cr2motorsports – I sent you a PM.

    #14752

    Stephen Lamana
    Participant

    How many you want? CR

     

    can an you get the wiring from the connector to kill switch with the pins already on the end? The stator I have, had them removed.

    #14775

    Chris Reinhardt
    Participant

    <div class=”d4p-bbt-quote-title”>Chris Reinhardt wrote:</div>
    How many you want? CR

    can an you get the wiring from the connector to kill switch with the pins already on the end? The stator I have, had them removed.

    I can get the connector with the pins and seals, I could make up a couple wires you could use to connect to a kill switch.
    If you don’t want to mess with it, send me the stator, I’ll take care of it for you…

    CR

    #16235

    Andrew Pachon
    Participant

    Kill switch on a shifter?

    ~A

    #16236

    Chris Reinhardt
    Participant

    Kill switch on a shifter? ~A

    Ever try stalling a motor at 100mph when the throttle is stuck wide open?

    #16554

    Stephen Lamana
    Participant

    <div class=”d4p-bbt-quote-title”>Stephen Lamana wrote:</div>

    <div class=”d4p-bbt-quote-title”>Chris Reinhardt wrote:</div>
    How many you want? CR

    can an you get the wiring from the connector to kill switch with the pins already on the end? The stator I have, had them removed.

    I can get the connector with the pins and seals, I could make up a couple wires you could use to connect to a kill switch.
    If you don’t want to mess with it, send me the stator, I’ll take care of it for you… CR

    <div class=”d4p-bbt-quote-title”>Andrew Pachon wrote:</div>
    Kill switch on a shifter? ~A

    Ever try stalling a motor at 100mph when the throttle is stuck wide open?

     

    Chris,

    PM me a price for the wires if I were to install them myself.

     

    I’ve always run a kill switch, best safety feature you can have even if you don’t use it all the time. Back in the road racing days 120mph at the end of a straight was scary if your throttle  was stuck!

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.