Home Forums Classifieds Classifieds – Parts Rotax/CR125/ICC/KT100 parts

This topic contains 0 replies, has 1 voice, and was last updated by  Mike Beeny 1 year, 12 months ago.

Viewing 1 post (of 1 total)
  • Author
  • #12213

    Mike Beeny

    1-Mychron 3 Gold Ebox and gauge with Mychron steering wheel. (USED)

    Has not been used for several years but was in good working condition when removed from kart. Steering wheel is a little rough. Download cable included.


    1- Bullseye model B2 laser alignment system. Have had for many years but only used a few times. The Sniper B2 is the taller version of the original Sniper and can be mounted on 40mm hubs or 17mm spindles . With an adapter it can also be mounted on 25mm spindles but i do not have that part.


    1-Racejet weather pod (new) with race Jet software for Windows and palm version 1.10

    Includes MaxJet FR125 Max version 1.3, Modem cable for downloads, Instructions.

    Serial# 04RJ-DB9-R.D-240470


    27- RS125 piston rings (New, in OEM bag) P/N 13121-NX5-701

    $15.00 each

    1-Race Jet weather pod (used a few times) with race Jet software for Windows and Palm version 2.60

    Includes Maxjet FR125-Jr-MiniMax version 1.61a,modem cable for downloads, instructions

    Serial# 05RJ-DB9-REV.F251167


    1-ICC jet kit



    Emulsion tubes DP 260,DP 267, DP268, DQ 261, DQ 262, DQ 265, DQ 266

    Inner pilots B45, B50, B55

    #40 slide

    Needles K21,K22,U2,U7


    1-Horstman 3rd bearing support (style B) New in box.

    Fits Kt-100s and DAP T-50.


    1- Horstman 3rd bearing support (style C) New in box.

    Fits TKM piston port and Reed, Yamaha Kt-100


    1- Sniper castor pill set (new)

    Left and right side, top and bottom pills


    1-RLV R2 exhaust pipe

    Stinger has been straightened out to keep silencer from burning rear bumper. This mod did not seem to hurt or help performance. There is 1 small spot weld to cover a pin hole.


    1-RLV R2 exhaust pipe

    Stock with no welds


    1-RLV C2 exhaust pipe

    Some welding work done on the header tube around the spring hooks.


    1-BRLV C5 exhaust pipe

    stock with no welds


    1-12″ adjustable/tunable M4 silencer (black type)

    Used for 1 track session. All tuning spacers included. 1″ ID inlet.


    1-12″ standard M4 silencer (silver type)

    This is an early silencer from around 2004 and has a good amount of use.


    1- 5132 R Elto ICC silencer (new)


    1-PVL ICC ignition coil p/n 105 458 (new)


    1-PVL ICC ignition stator/flywheel (new)


    2006 Maxter ICC counter gears




    $5.00 each

    Buyer pays shipping. Pictures available.



Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.