Home Forums Rotax Max Rotax Jetting

This topic contains 11 replies, has 4 voices, and was last updated by  Steve Jordan 2 weeks, 1 day ago.

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #30039

    Steve Jordan
    Participant

    I’m changing to a new computer and need to transfer my Jet Tech software. What do I need to do to complete this process?

    #30041

    Patrick Roth
    Participant

    Delete

    #30046

    tony zambos
    Participant

    Go to the Jet Tech web site and there are instructions on how to transfer the software to another pc. Should not require any luck at all.

    #30047

    Patrick Roth
    Participant

    Delete

     

    #30052

    tony zambos
    Participant

    Steve,
    now that I have a real computer to work with, this is the link to the FAQ page of Jet Tech.

    http://www.rotaxjetting.com/FAQ.htm#Transfer

    or even better. http://www.rotaxjetting.com/LicenseTransfer.htm

    #30055

    Steve Jordan
    Participant

    Thanks Tony for the help. I went to the web site and did as instructed with the emails but I have yet to receive a reply back from Jet Tech. So I was hoping to have John reply so I could have him check his email. I sent the emails back on 29th of June.

     

    #30058

    tony zambos
    Participant

    Steve,
    Hopefully this thread will catch John’s eye. Know his email was hatched into earlier in the year and he couldn’t/wouldn’t respone. But I believe that has been resolved.

    #30061

    John Savage
    Participant

    Steve, I have emailed Colin about this thread so he has a heads up

    Patrick, who on earth told you that?

     

    Tony, many thanks

     

    #30062

    John Savage
    Participant

    ps: what happened to the quote feature on this forum?

    #30063

    Patrick Roth
    Participant

    John,

    I was mistaken as I misunderstood a previous communication I had with Colin.  I have deleted my previous posts just to prevent any confusion as my statement was inaccurate.

    Thanks!

     

    #30064

    tony zambos
    Participant

    Nice job on both John’s and Patrick’s parts.

    #30068

    Steve Jordan
    Participant

    Thanks for help John

Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.