Home Forums Classifieds Classifieds – Parts Misc. CRG chassis/shifter/Leopard parts

This topic contains 2 replies, has 2 voices, and was last updated by  J.C. Peterson 10 months, 4 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #15252

    J.C. Peterson
    Participant

    Cleaning out the trailer! PM me for more details & photos. All CRG chassis parts are from an older Blue Demon. Leopard parts are all Pre-MY09. All reasonable offers will be taken.

     

    – Leopard crank/rod – Clutch side damaged

    – CR80 crank/rod (rod will likely need replaced but crank is good)

    – CR80/85 o-ring exhaust manifold

    – CRG front nerf bar

    – 40 mm Righetti Ridolfi axles (B compound – Medium)

    – IAME exhaust tip

    – Leopard exhaust header w/ EGT port

    – Leopard blue ignition coil

    – Exhaust flex wrap (8″ long)

    – Leopard 10 tooth clutch sprocket (aftermarket)

    – Leopard starter adapter drive

    – Leopard ignition rotor

    – Pre-MY09 Leopard cylinder head

    – Complete Leopard push-button wiring harness and ignition stator

    – CRG 2000-up brake caliper mounting bracket

    – Birel “Banana” rear brake pads (2008+) – Sinter Red Carbon 222

    – CRG 100 cc spindles (left & right) – 17 mm w/ 8mm kingpin bolts & new bearings included

    – CRG 4-position camber/caster pills (8 mm kingpin)

    – CRG front wheel hubs – 17 mm x 80 mm (CRG wheel pattern)

    – 40 mm axle shifter sprockets (428 chain): 22 & 23 steel / 27, 28, 29 aluminum

    – Righetti Ridolfi rear bumper mounts (plastic bumpers) – 30 mm chassis

    – 40 mm axle hubs: 100 mm (2 ea.),

    – 50 mm x 85 mm Freeline axle hubs (2 ea.)

    – Douglas aluminum front wheels (CRG pattern- 5″ width/2.25″ backspace): 4 ea. black / 2 ea. polished

    – Douglas aluminum rear wheels (7.75″ width/2.5″ backspace): 2 ea.

    – 40 mm axle sprocket carrier

    – 50 mm axle sprocket carrier

    – Leopard starter (needs brushes)

    – Odenthal 10 deg. Tag engine mount (& vibration plate)

    – 219 chain breaker tool

    – Leopard reed cage (complete) – reeds will need replaced

    – 40 mm axle plastic water pump pulley

    – Leopard clutch cover w/ coil mount

    – Slant-style sidepods (complete)

    – Black  Freeline-style nose w/ CRG decals

    – Red Freeline-style nose (blank)

    #15527

    Tony Lischak
    Participant

    I’m interested in the Odenthal 10 deg mount can email me pictures and price kkartsport@yahoo.com

    #20322

    J.C. Peterson
    Participant

    Bump

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.