Home › Forums › Chassis & Handling › Hubs on front spindles
This topic contains 2 replies, has 3 voices, and was last updated by PJ Lyda 1 month, 4 weeks ago.
I’ve noticed a few racers using hubs on their front spindles.
What’s the advantage and when is it worth one’s extra time & expense?
I’m running a 2013 Margay Brava, Yamaha KT100 Y-Pipe.
When you want a slightly stiffer front end…or just want to use hub-mount wheels you might have lying about.
As bill said the hubs tend to add a stiffer front end. But now most of the newer chassis run 25 mm spindles. Which they don’t make a direct spindle mount front wheel for which makes the you have to run the front hubs.
You must be logged in to reply to this topic.
October 1, 2014 / by David Cole
September 30, 2014 / by David Cole
September 26, 2014 / by David Cole
September 25, 2014 / by David Cole
No comments / by David Cole
September 19-21, 2014 - New Castle, IN
September 26-28, 2014 - Lancaster, CA
Streets of Lancaster Grand Prix
October 15-19, 2014 - Mooresville, NC
Rotax Pan American Challenge
November 19-23, 2014 - Las Vegas, NV
Superkarts! USA SuperNationals XVIII