Home Forums General Karting Discussion Front caliper replacement options

This topic contains 3 replies, has 4 voices, and was last updated by  FREDDY SANDOVAL 2 years, 5 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #52017

    John Starkweather

    Looking to go the same route and replace the front calipers with something inexpensive like we did with the rear on my last post “http://ekartingnews.com/forums/topic/rear-caliper-rebuild/”. I measured 35mm bolt spacing but I measured them on the kart and it might be a little off. I did a search but couldn’t find something as good and cheap as the MBA rear caliper setup.

     photo IMG_20150715_2028192_rewind_zpsfeqne8up.jpg


    Chad Landers

    Those look to be skm calipers.  I just rebuilt some that were the same kind.  Fastech-racing and Italian Motors have skm brake parts.


    Paul Hir

    ridolfi righetti maybe, they seem to be inexpensive.



    I have a friend with a complete, almost new set up off a Top Kart (they should fit, as they look SKM also.)

    Hubs, spindles, rotors, etc. I think they were only used once if any

    I can contact him, if interested?

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Karting's News and Information Leader ekartingnews | an HMG publication