Home › Forums › General Karting Discussion › FLOOR PAN BOLT ?
This topic contains 2 replies, has 3 voices, and was last updated by Walt Gifford 1 year, 4 months ago.
Is there a reason that button head allen bolts are not used from the bottom pointing up to hold the floor pan on so that the nuts are not ground off. We did this years ago and was wondering why this changed.
Some people still do this. I guess its different by manufacturer.
KartLift Kart Stands
DeepSeat Kart Seats
Don't bother PMing me, it doesn't work. Email is best: firstname.lastname@example.org.
It should be a safety rule that the heads must be on the bottom. Anyone with common sense and a conscience will do it that way. No need for anyone to get run over with a cheese grater.
FAA certified jet engine and aircraft technician,
Nicholson Speedway class champion 2001,
Yamaha KT100 Service Center,
41 years karting experience
You must be logged in to reply to this topic.
April 7-9, 2017
Challenge of the Americas
May 5-7, 2017
SKUSA Pro Tour SpringNationals
May 19-21, 2017
WKA Manufacturers Cup Series
June 2-4, 2017
United States Pro Kart Series