Home › Forums › TaG › Different carbs for Leopard?
This topic contains 4 replies, has 3 voices, and was last updated by Oscar Biondi 11 months, 3 weeks ago.
I see most Leopards running the HL334AB Tillotson, but rarely the HL334A. Is there a downside to the 334A?
The difference between the A, AA, AB is where the machining of the carburetor was performed
A @ IAME before 2001
AB @ Tillotson
AA @ IAME somewhere around 2007 IIRC
That’s interesting. EC carbs has the HL334A as having a 19mm venturi and the HL334AB and AA as having 23mm venturi. Supposedly all have 25.4mm throttle bore. Is that info wrong?
The venturi’s look to be the same diameter between the “A” and the “AB”. I saw that same info and measured them
You must be logged in to reply to this topic.
September 12, 2014 / by David Cole
September 11, 2014 / by David Cole
September 9, 2014 / by David Cole
No comments / by David Cole
September 19-21, 2014 - New Castle, IN
September 26-28, 2014 - Lancaster, CA
Streets of Lancaster Grand Prix
October 15-19, 2014 - Mooresville, NC
Rotax Pan American Challenge
November 19-23, 2014 - Las Vegas, NV
Superkarts! USA SuperNationals XVIII