Home Forums 250 Superkarts CR250 Identification

This topic contains 7 replies, has 3 voices, and was last updated by  Ian Harrison 1 year, 9 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #16588

    Greg Wright
    Participant

    Need some help. A customer dropped off a CR250 engine and I need somebody to point me in the direction of finding out the approximate year of manufacture.

     

    Ian? Somebody?

     

     

    Greg Wright
    Rapid Racing Inc.

    "When in doubt Gas it, It won't help but it ends the suspense."

    #16590

    mark crook
    Participant

    first two numbers in the engine code.

    62 = 2000

    63 = 2001

    64 = 2002

    65 = 2003………. and so on. (I THINK)

     

    "When In Doubt, Flat Out" - Colin McRae

    #16603

    Greg Wright
    Participant

    Is this the number on the plate below the output shaft? Number there is 901444.

     

    I dunno.

    Greg Wright
    Rapid Racing Inc.

    "When in doubt Gas it, It won't help but it ends the suspense."

    #16610

    mark crook
    Participant

    if the numbers are slightly worn down you could be mistaking the 6 for a 9??

    in which case the motor would have 1998 crankcase.

    don’t take my word for it however.

     

     

    "When In Doubt, Flat Out" - Colin McRae

    #16612

    Greg Wright
    Participant

    OK,  After much staring and swearing it appears that the number is actually 5901444.

    That would appear to make it a ’97. Yes?

    Greg Wright
    Rapid Racing Inc.

    "When in doubt Gas it, It won't help but it ends the suspense."

    #16615

    mark crook
    Participant

    that should be correct, yes, if i’m not mistaken

    "When In Doubt, Flat Out" - Colin McRae

    #16617

    Greg Wright
    Participant

    Thanks Mark.

    Greg Wright
    Rapid Racing Inc.

    "When in doubt Gas it, It won't help but it ends the suspense."

    #16682

    Ian Harrison
    Participant

    Hi Greg and Mark

    Yes indeed that’s a ’97

    Here’s a link that CR250 people will find useful:

    http://www.oem-cycle.com/HONDACR250BIKEID.shtml

    Best Regards

    Ian :-)

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.