Home Forums Chassis & Handling Arrow X-3 setup

This topic contains 4 replies, has 2 voices, and was last updated by  Jim Silverheels 9 months, 3 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #56283

    Jim Silverheels
    Participant

    Would anyone care to share what seat and chassis measurements they use please? thanks

    #56354

    Tim Pappas
    Participant

    What brand and size seat?

    #56365

    Jim Silverheels
    Participant

    Hi Tim, standard medium Kart Tech seat that comes with the kart.. thanks

    #56534

    Tim Pappas
    Participant

    The seat should be 90mm forward from the top of the seat to the back of the axle. Measure with a level perpendicular to earth placed against the back of the axle. The measurement from the top of the axle to the top of the seat should be 200mm.  Square the front ears to the front. The bottom flush with the frame.  That’s the baseline setting for the karttech seat that we use for the Kartsport NA race team.

    #56541

    Jim Silverheels
    Participant

    Tim, thanks I owe you big time!

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Karting's News and Information Leader ekartingnews | an HMG publication