2011 Birel RY30 shifter with 125cc stock honda engine + everything you need to race at the Pro Kart Challenge level or regional level.
Click link below for Pictures (Scroll through my flickr photo stream to view. Call or email for more pics)
Race Package includes – 50mm axles (B short, D, F, M), 6 hole tunable wheels and hubs, new style thin disc brakes, 16 position caster/camber pills on front end, and 25mm tunable front axle shafts. It has all the bells and whistles. Comes with 2 sets of wheels. New set of tires and several sets of used tires still good for practice.
SRS Stock Honda Engine with less than 10 hours of run time on complete maintenance build by John Sefcik (SRS engines) – new piston, ring, crank w/slip fit bearings, all new bearings, etc. New top end kit installed at 4 hours, and again at 8 hours. There was nothing wrong with the motor, just playing it safe. Very good, fast, and dependable motor.
Pump around carb system with Mikuni Dual pump and 38mm PWM carb.
SRS reed package with stock intake manifold – new reeds installed with 1 practice session run time.
Mychron 4 with E-Box, exhaust temp, water temp, and GPS
RLV R4 pipe
O-ring exhaust manifold
SRS 16 inch tunable silencer
SRS coil mount, Swedetec ignition box mount, exhaust mount, and Aluminos engine mount
Champion medium radiator
Transponder with charger and mount
Spares / Support (included in race package):
14t, 15t, & 16t pinion gears
24t & 26t axle gears
11 Wheels (6 front, 5 rear)
small seat, Tillett ML seat, and Tillett L seat (L currently installed)
Front hub removal tool
Tire bead breaker
Tire mount/dis-mount tool
Acceleration Karting spare nuts, bolts, brackets, etc. kit
Collapsible kart stand with caster wheels
Fuel pump rebuild kits
spare brake pads and shims
K&N air filter
5 gallon fuel can
10 gallon VP fuel storage drum
Ratio Rite oil mixing cup
At least 1 bottle of every fluid needed (brake, engine oil, radiator etc.)
Chain lube and bearing lube
2 sets of old style freeline rear 50mm hubs – short and standard
1 pair of spare front spindle axles – new
2 kingpins – new
4 tie rods – new
4 tie rod ends – new
Modified cylinder for option to run kart in Honda Modified class (was never installed on my engine)
Driving gear(included in race package):
Medium Bell Karting suit (blue & white)
K1 racegear carbon fiber rib protector
360 plus race device neck brace
Complete race package ready to race – $6800
Kart only (complete chassis w/ M-axle, 1 set wheels, engine, L seat, radiator) – $5500
Extras for sale:
VP 54 gallon drum of MS-98 fuel for sale – $300
Purchased about 8 or 9 months ago. At least 40 gallons left. Will also sell at $9 per gallon or $300 for all of it.
Two-kart stacker system – $250
Can stack karts and roll them easily into your trailer. Stacker converts to work bench.
The kart is located in San Angelo, TX. I will deliver the kart to (or near) any major city in Texas if buyer covers my fuel cost. Shipping can be arranged if necessary at buyers expense.
Stuart Hembree 830-261-1979
You must be logged in to reply to this topic.