--> ekartingnews

Home Forums Chassis & Handling Toe Sweep Alignment Measurement??? Reply To: Toe Sweep Alignment Measurement???


Barry Hastings

What he was saying to do was make sure the steering shaft was in the center, that both tires were pointed the same distance from each other when steering wheel is straight.  You can do that with a tape and tow plates and even with the line on the tires…

That said, you probably have some bend issues from the accident.  IF the toe was set straight or 2mm out or what ever your preference is, even if your steering shaft is say clocked 10 degrees one way or the other, on the straight it shouldn’t pull, but in the turns left and right there could be a difference in the turn performance from that steering shaft being clocked…