--> ekartingnews

Home Forums Shifter Karts CR125 How to Seal Exhaust Reply To: CR125 How to Seal Exhaust

#52520

James O’Brien
Participant

Todd, it sounds like maybe your pipe is not square on the manifold or you have a manifold that has the grooves cut to deep (it happens). I would suggest going back to the stock Honda OEM manifold and sealing ring. This is if your pipe is not worn out. On our 99 and 01 engines we don’t have any splatter problems using the SKUSA S-1 Pipe, if we do usually it’s because the pipe needs to be adjusted.

ekartingnews