Home Forums Tech Talk Spindles: Can someone help me understand the variables Reply To: Spindles: Can someone help me understand the variables

#47059

Steen Carstensen
Participant

The 10 or 12 degree is the angle between the kingpin/bolt and the spindle i.e. a 10 degree will give you 2 degrees more negative camber.

The 25mm spindle is of cause stiffer than the 17mm, but is also supported by a 10mm kingpin, as compare to 8mm for the 17mm.

Hope this helps.

Karting's News and Information Leader ekartingnews | an HMG publication