Home Forums Chassis & Handling All Things Seat Stays Reply To: All Things Seat Stays

#32296

Kirk Towles
Participant

On our OTK kart we use 2 standard struts on the left and 1 purpose built bent OTK strut on the engine side (it has 2 attachment points on the carrier and seat). It clears the exhaust nicely. I mount them on the carrier at the top of the axle and the next point just ahead of the axle and then towards the top of the seat. It creates more side bite allowing the inside rear to lift better and rotate thru the corner rather than sliding the rear thru the corner.

Karting's News and Information Leader ekartingnews | an HMG publication