Home Forums TaG Another Leopard electrical problem… (help) Reply To: Another Leopard electrical problem… (help)

#27800

Sean Swisz
Participant

That is a great video btw. You will know right away if the starter brush is bad. Pull the bottom half with the drive gear off (2 or 3 allen bolts) and hold the armature from the spline. Then remove the 3 phillips head screws (Good luck… so tight I had to cut groves and use a flat head) and the two allen bolts. While holding the armature spline, pull off the golden colored magnet housing and see if the brushes are attached. One of mine fell right out when I pulled off the housing. Good luck

Tony Kart / Leopard

Karting's News and Information Leader ekartingnews | an HMG publication