Home Forums 2-Cycle Racing Kt100 to crg kt1 question Reply To: Kt100 to crg kt1 question

#20282

Walt Gifford
Participant

Some sprocket mounts are double sided. Make sure the flat side is on the inside. Do you have the sprocket on the inside of the sprocket mount with the heads of the bolts to the inside? The heads of the Axle bearing bolts should be to the outside.

Gif

FAA certified jet engine and aircraft technician,
Nicholson Speedway class champion 2001,
Yamaha KT100 Service Center,
41 years karting experience